Name:

Contact:

Email: *

Message: *

Product Description

KPI Film Face Densified Shuttering Plywood is a product of high end uses. It is manufactured with high density timber Glued with BWP Grade Phenol formaldehyde resin and pressed in high densified hot press. It has extra strength than ordinary film face ply due to high pressure used for structurally strong and better bonding. It is treated by ACC through pressure impregnation while manufacturing.The film face shuttering plywood has coated glossy surface, which gives the product long life and great value in terms of reuse. This plywood withstands the corrosive action of cement, water & sunlight. KPI film faced densified ply is known for the maximum repetitions. User’s find it very useful and economical product according to their investments. Shuttering Ply in Noida

Plywood For Concrete Shuttering Work Film Face (CSFF)

Technical Specification (IS - 1659 : 2004)
Serial No. Test BIS Requirement Observed Value
1. Dimension Length 2440 + 6 / -0 (mm) 2441 mm
Width 1 2 2 0 + 3 / -0 (mm) 1221 mm
Thickness 1 2 m m +5 % / -5% 12.10 mm
Squareness 2 m m / 1000 mm 0.80 mm
Edge Straightness 2 mm / 1000 mm 0.65 mm
2. Density 650kg/m3 850-995kg/m3
3. Moisture Content 5-15% 7%
4. Glue Adhesion in Dry State
Glue Shear Strength Avg. - 1350 N Ind. - 1100 N Avg. - 1480 N Ind. - 1220 N
Wood Failure As Per Table One NA
Adhesion of Plies Shall Be Min. Pass Standard Excellent
5. Water Resistance Test
Glue Shear Strength Avg. - 1000 N Ind. - 800 N Avg. - 1240 N Ind. - 910 N
Wood Failure As Per Table One NA
Adhesion of Plies Shall Be Min. Pass Standard Pass Standard
jxhvjhvbh jxhvjhvbh jxhvjhvbh
6. Tensile Strength
Along the Grain Direction 32.5 N / mm2 44.5 N / mm2
Across the Grain Direction 22.5 N / mm2 38.5 N / mm2
Along + Across the Grain Direction 60.0 N / mm2 83.0 N / mm2
7. Static Bending
MOR Along the Grain Avg. - 50 N / mm2 Ind. - 45 N / mm2 Avg. 58.06 N/mm2 Ind. 46.20 N/mm2
MOR Across the Grain Avg. - 30 N / mm2 Ind. - 27 N / mm2 Avg. 36.20 N/mm2 Ind. 31.60 N/mm2
MOE Along the Grain Avg. - 7500 N/mm2 Ind. - 6700 N/mm2 Avg. 7920 N/mm2 Ind.7110 N/mm2
MOE Across the Grain Avg. - 4000 N/mm2 Ind. - 3600 N/mm2 Avg. 4220 N/mm2 Ind. 3810 N/mm2
8. Wet Bending Strength
MOR Along the Grain Avg. - 25 N / mm2 Ind. - 22 N / mm2 Avg. 27.0 N / mm2 Ind. 24.1 N / mm2
MOR Across the Grain Avg. - 15 N / mm2 Ind. - 13 N / mm2 Avg. 20.9 N / mm2 Ind. 18.6 N / mm2
MOE Along the Grain Avg. - 3750 N/mm2 Ind. - 3400 N/mm2 Avg. 4000 N/mm2 Ind. 3910 N/mm2
MOE Across the Grain Avg. - 2000 N/mm2 Ind. - 1800 N/mm2 Avg. 2300 N/mm2 Ind. 2100 N/mm2
9. MyCological Test
Edge of Specimen Shall Be no Sign Of Separation No Sign of Separation at Edges
Glue Shear Strength Avg. - 1000 N Ind. - 800 N Avg. 1356 N Ind. 1140 N
Wood Failure As Per Table 1 NA
Adhesion of Plies Shall Be Min. Pass Standard Pass Standard
10. Visual Observation of Surface Layers after being Subjected to 72 hrs Boiling. Shall not Show any Softening Checking, Cracking or Deterioration of the surface layer No sign of Softening Checking, Cracking or Deterioration of the surface layer
11. Retention of Preservative (ACC) 12 kg / m3 12.83 kg / m3
12. Workmanship And Finish Satisfactory Satisfactory